unit-testing.md

title
Unit testing

Unit testing is a great way to protect against errors in your code before you deploy it. While Gatsby does not include support for unit testing out of the box, it only takes a few steps to get up and running. However there are a few features of the Gatsby build process that mean the standard Jest setup doesn't quite work. This guide shows you how to set it up.

Setting up your environment

The most popular testing framework for React is Jest, which was created by Facebook. While Jest is a general purpose JavaScript unit testing framework, it has lots of features that make it work particularly well with React.

For this guide, you will be starting with gatsby-starter-blog, but the concepts should be the same or very similar for your site.

First you need to install Jest and some more required packages. You need to install Babel 7 as it's required by Jest.

npm install --save-dev jest babel-jest react-test-renderer identity-obj-proxy 'babel-core@^7.0.0-0' @babel/core babel-preset-gatsby

Because Gatsby handles its own Babel configuration, you will need to manually tell Jest to use babel-jest. The easiest way to do this is to add a jest.config.js. You can set up some useful defaults at the same time:

module.exports = {
  "transform": {
    "^.+\\.jsx?$": "<rootDir>/jest-preprocess.js"
  },
  "moduleNameMapper": {
    ".+\\.(css|styl|less|sass|scss)$": "identity-obj-proxy",
    ".+\\.(jpg|jpeg|png|gif|eot|otf|webp|svg|ttf|woff|woff2|mp4|webm|wav|mp3|m4a|aac|oga)$": "<rootDir>/__mocks__/fileMock.js"
  },
  "testPathIgnorePatterns": ["node_modules", ".cache"],
  "transformIgnorePatterns": ["node_modules/(?!(gatsby)/)"],
  "globals": {
    "__PATH_PREFIX__": ""
  },
  "testURL": "http://localhost",
  "setupFiles": ["<rootDir>/loadershim.js"]
}

The transform section tells Jest that all js or jsx files need to be transformed using a jest-preprocess.js file in the project root. Go ahead and create this file now. This is where you set up your Babel config. You can start with a minimal config.

const babelOptions = {
  presets: ["babel-preset-gatsby"],
}

module.exports = require("babel-jest").createTransformer(babelOptions)

Back to the Jest config, you can see the next option is moduleNameMapper. This section works a bit like webpack rules, and tells Jest how to handle imports. You are mainly concerned here with mocking static file imports, which Jest can't handle. A mock is a dummy module that is used instead of the real module inside tests. It is good when you have something that you can't or don't want to test. You can mock anything, and here you are mocking assets rather than code. For stylesheets you need to use the package identity-obj-proxy. For all other assets you need to use a manual mock called fileMock.js. You need to create this yourself. The convention is to create a directory called __mocks__ in the root directory for this. Note the pair of double underscores in the name.

module.exports = "test-file-stub"

The next config setting is testPathIgnorePatterns. You are telling Jest to ignore any tests in the node_modules or .cache directories.

The next option is very important, and is different from what you'll find in other Jest guides. The reason that you need transformIgnorePatterns is because Gastby includes un-transpiled ES6 code. By default Jest doesn't try to transform code inside node_modules, so you will get an error like this:

/my-blog/node_modules/gatsby/cache-dir/gatsby-browser-entry.js:1
({"Object.<anonymous>":function(module,exports,require,__dirname,__filename,global,jest){import React from "react"
                                                                                            ^^^^^^
SyntaxError: Unexpected token import

This is because gatsby-browser-entry.js isn't being transpiled before running in Jest. You can fix this by changing the default transformIgnorePatterns to exclude the gatsby module.

The globals section sets __PATH_PREFIX__, which is usually set by Gatsby, and which some components need.

You need to set testURL to a valid URL, because some DOM APIs such as localStorage are unhappy with the default (about:blank).

Note: if you're using Jest 23.5.0 or later, testURL will default to http://localhost so you can skip this setting.

There's one more global that you need to set, but as it's a function you can't set it here in the JSON. The setupFiles array lets you list files that will be included before all tests are run, so it's perfect for this.

global.___loader = {
  enqueue: jest.fn(),
}

Finally it's a good idea to mock the gatsby module itself. This may not be needed at first, but will make things a lot easier if you want to test components that use Link or GraphQL.

const React = require("react")
const gatsby = jest.requireActual("gatsby")

module.exports = {
  ...gatsby,
  graphql: jest.fn(),
  Link: jest.fn().mockImplementation(({ to, ...rest }) =>
    React.createElement("a", {
      ...rest,
      href: to,
    })
  ),
  StaticQuery: jest.fn(),
}

This mocks the graphql() function, Link component, and StaticQuery component.

One more issue that you may encounter is that some components expect to be able to use the location prop that is passed in by Router. You can fix this by manually passing in the prop:

import React from "react"
import renderer from "react-test-renderer"
import BlogIndex from "../pages/index"

describe("BlogIndex", () => {
  it("renders correctly", () => {
    const location = {
      pathname: "/",
    }

    const tree = renderer.create(<BlogIndex location={location} />).toJSON()
    expect(tree).toMatchSnapshot()
  }))
})

For more information on testing page components, be sure to read the docs on testing components with GraphQL

Writing tests

A full guide to unit testing is beyond the scope of this guide, but you can start with a simple snapshot test to check that everything is working.

First, create the test file. You can either put these in a __tests__ directory, or put them elsewhere (usually next to the component itself), with the extension .spec.js or .test.js. The decision comes down to your own taste. For this guide you will be testing the <Bio /> component, so create a Bio.test.js file next to it in src/components:

import React from "react"
import renderer from "react-test-renderer"
import Bio from "./Bio"

describe("Bio", () => {
  it("renders correctly", () => {
    const tree = renderer.create(<Bio />).toJSON()
    expect(tree).toMatchSnapshot()
  })
})

This is a very simple snapshot test, which uses react-test-renderer to render the component, and then generates a snapshot of it on first run. It then compares future snapshots against this, which means you can quickly check for regressions. Visit the Jest docs to learn more about other tests that you can write.

Running tests

If you look inside package.json you will probably find that there is already a script for test, which just outputs an error message. Change this to simply jest:

  "scripts": {
    "test": "jest"
  }

This means you can now run tests by typing npm run test. If you want you could also add a script that runs jest --watchAll to watch files and run tests when they are changed.

Now, run npm run test and you should immediately get an error like this:

 @font-face {
    ^

    SyntaxError: Invalid or unexpected token

      2 |
      3 | // Import typefaces
    > 4 | import 'typeface-montserrat'

This is because the CSS mock doesn't recognize the typeface- modules. You can fix this easily by creating a new manual mock. Back in the __mocks__ directory, create a file called typeface-montserrat.js and another called typeface-merriweather.js, each with the content {}. Any file in the mocks folder which has a name that matches that of a node_module is automatically used as a mock.

Run the tests again now and it should all work! You should get a message about the snapshot being written. This is created in a __snapshots__ directory next to your tests. If you take a look at it, you will see that it is a JSON representation of the <Bio /> component. You should check your snapshot files into a source control system (for example, a GitHub repo) so that so that any changes are tracked in history. This is particularly important to remember if you are using a continuous integration system such as Travis to run tests, as these will fail if no snapshot is present.

If you make changes that mean you need to update the snapshot, you can do this by running npm run test -- -u.

Using TypeScript

If you are using TypeScript, you need to make a couple of small changes to your config. First install ts-jest:

npm install --save-dev ts-jest

Then update the configuration in jest.config.js, like so:

module.exports = {
  "transform": {
    "^.+\\.tsx?$": "ts-jest",
    "^.+\\.jsx?$": "<rootDir>/jest-preprocess.js"
  },
  "testRegex": "(/__tests__/.*\\.([tj]sx?)|(\\.|/)(test|spec))\\.([tj]sx?)$",
  "moduleNameMapper": {
    ".+\\.(css|styl|less|sass|scss)$": "identity-obj-proxy",
    ".+\\.(jpg|jpeg|png|gif|eot|otf|webp|svg|ttf|woff|woff2|mp4|webm|wav|mp3|m4a|aac|oga)$": "<rootDir>/__mocks__/fileMock.js"
  },
  "moduleFileExtensions": ["ts", "tsx", "js", "jsx", "json", "node"],
  "testPathIgnorePatterns": ["node_modules", ".cache"],
  "transformIgnorePatterns": ["node_modules/(?!(gatsby)/)"],
  "globals": {
    "__PATH_PREFIX__": ""
  },
  "testURL": "http://localhost",
  "setupFiles": ["<rootDir>/loadershim.js"]
}

You may notice that two other options, testRegex and moduleFileExtensions, have been added. Option testRegex is the pattern telling Jest which files contain tests. The pattern above matches any .js, .jsx, .ts or .tsx file inside a __tests__ directory, or any file elsewhere with the extension .test.js, .test.jsx, .test.ts, .test.tsx, or .spec.js, .spec.jsx, .spec.ts, .spec.tsx.

Option moduleFileExtensions is needed when working with TypeScript. The only thing it is doing is telling Jest which file extensions you can import in your files without making precise the file extension. By default, it works with js, json, jsx, node file extensions so we just need to add ts and tsx. You can read more about it in Jest's documentation.

Other resources

If you need to make changes to your Babel config, you can edit the config in jest-preprocess.js. You may need to enable some of the plugins used by Gatsby, though remember you may need to install the Babel 7 versions. See the Gatsby Babel config guide for some examples.

For more information on Jest testing, visit the Jest site.

For an example encapsulating all of these techniques--and a full unit test suite with react-testing-library, check out the using-jest example.